Ms Như
0373 238 670-
Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption < 80 mA 3) Switching frequency 10 kHz 4) Response time 50 µs 5) Switching output NPN Switching output (voltage) NPN: HIGH = approx. VS / LOW ≤ 2 V Output current Imax. 100 mA 6) Input, teach-in (ET) NPN
Teach: U < 2 V
Run: U = 10 V ... < UV
Retention time (ET) 25 ms, non-volatile memory Connection type Male connector M12, 5-pin Protection class II 7) Circuit protection UV connections, reverse polarity protected
Output Q short-circuit protected
Interference pulse suppression
Enclosure rating IP67 Weight 400 g Housing material Zinc diecast - 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) With light/dark ratio 1:1.
- 5) Signal transit time with resistive load.
- 6) Short-circuit protected.
- 7) Reference voltage DC 50 V.
-
AMBIENT DATA
