ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng 
“Thiết bị điện, Điện công nghiệp, Điện tự động”

Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.

Với những thương hiệu hàng đầu và uy tín trên khắp thế giới như: Balluff, Wise, Brooks Instrument, Crouzet - Crydom, Kuebler, Ametek, Dakota, Epluse, Koganei, Status, Sterilair,...

Liên hệ cho chúng tôi theo số 0939 381 395 để CÓ thông tin mà Quý khách CẦN.

- Ms Thư -

< Sales  Engineer>
Email : thu@ansgroup.asia 
Skype :   thu_325
  Web: http://anhnghison.com/

 

A reference frame makes it easy to scoop up the selected number of ends for measurement and keeps the unit perpendicular while it rests on the warp. K10, K30 & EX ranges are supplied with a 10 mm sensing pin. For the 200 and 500 range codes select either a 17 or 34 mm sensing pin.

Features

  • Width of the sensing pin 10 mm (17mm and 34 mm optionally available)
  • Finger Support: We recommend mounting a finger support for higher tension ranges 
  • Roller shifting mechanism ensure easy acquisition of the running material
  • Large reference frame (15 x 17 cm) is placed on the warp threads allowing the safest and most accurate mesaurements possible.
  • Supplied in foam-fitted hard-plastic carrying case

Tension Ranges

Model Range Sensing Pin Length
K10 20-100 g 10mm
K30 20-300 g 10mm
EX 100-1000 g 10mm
200 200-2000 g 10mm
500 500-5000 g 10mm

KXB Operation

We recommend always measuring the same number of ends, such as 5 or 10 ends (repeat of pattern) or only a single end at a time. During measurement make sure that the ends are not pulled or pressed out of their alignment.

Options

 
Memory Pointer (M)

Designed to retain the peak value as tensions fluctuate. Manually reset by using the knob located in the center of the dial.
   

Complete Kit

The KXB Tension Meter is supplied as a complete kit including meter and instruction manual in a foam-fitted hard-plastic carrying case.

Downloads

 
PDF Instruction Manual
PDF File
 
PDF Data Sheet
PDF File

Specifications

Accuracy ± 1% of full scale or
± 1 graduation mark on scale
Diameter of Scale 41 mm
Housing Material Die-cast aluminum
Temperature range 50 - 113°F (10 - 45°C)
Air humidity 85 % RH, max.
Housing dimensions(L x W x H) 7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm)
Weight, net (gross) 1 lbs (2 lbs)