ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng 
“Thiết bị điện, Điện công nghiệp, Điện tự động”

Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.

Với những thương hiệu hàng đầu và uy tín trên khắp thế giới như: Balluff, Wise, Brooks Instrument, Crouzet - Crydom, Kuebler, Ametek, Dakota, Epluse, Koganei, Status, Sterilair,...

Liên hệ cho chúng tôi theo số 0939 381 395 để CÓ thông tin mà Quý khách CẦN.

- Ms Thư -

< Sales  Engineer>
Email : thu@ansgroup.asia 
Skype :   thu_325
  Web: http://anhnghison.com/

 

Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape. 

Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured. 

NOTE: Starting point of low-range instruments will be higher than DX2.

Note: This model does not include a filament guide and material thickness compensator

Features

  • Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller)
  • Tape rollers with contact surface from 7 mm up to 50 mm are available
  • Roller shifting mechanism ensure easy acquisition of the running material
  • Finger Support: We recommend mounting a finger support for higher tension ranges 
  • Built-in mounting holes permit fixed installation for online use

Tension Ranges

Model Range Outer Roller
Spacing		 Roller Widths
TX2-5 10 - 50 g 57 mm 7
TX2-12 20 - 120 g 57 mm 7,10,15,20,30
TX2-20 20 - 200 g 57 mm 7,10,15,20,30
TX2-40 20 - 400 g 57 mm 7,10,15,20,30
TX2-EX 100 - 1000 g 57 mm 7,10,15,20,30,36,41,50
TX2-200 200 - 2000 g 117 mm 7,10,15,20,30,36,41,50
TX2-500 400 - 5000 g 117 mm 7,10,15,20,30,36,41,50
TX2-1K 2.5 - 10 kg 117 mm 7,10,15,20,30
TX2L-2K 5 - 20 kg 117 mm 7,10,15,20
Calibration to customized material:
If process material differs significantly from the standard calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 15 ft. should be supplied.